Reid Select

3-arm prong knobs are among the most common type of lobed knob, allowing easy access even with thick gloves on for small adjustments to equipment and workpieces across industries.

Find inch and metric 3-lobed knobs at Reid Supply in both female and male thread inserts of a variety of materials, including plastic, stainless steel, and brass insert threading in Reid Supply’s online catalog.

Lobed knobs, also called clamping knobs, have a scalloped edge with four grip points to allow for maximum grip and comfort, even while wearing gloves.

These durable lobed knobs are impact- and chemical-resistant and provide a neat appearance for finished applications that require precision adjustments.

Reid Supply has a wide range of 4-lobed knobs, from plastic knobs to stainless steel and iron in a variety of thread sizes and mounting types.

Learn more about what solutions exist for your application in our article on selecting the right knobs and handles.

6-lobed prong knobs provide a symmetrical grip across a variety of materials for customizing clamping and manual adjustment of workpieces or equipment.

Our 6-arm prong knobs come in steel, aluminum, plastic, and with a variety of insert threading materials, from brass to steel.

Find the inch or metric size you need for your lobed knob needs online today.

Learn more about the differences between types of lobed knobs by visiting our knowledge center and reading how to Select the Right Knobs and Handles.

Abrasive brushes are ideal for cleaning, deburring, and finishing applications. We carry a wide assortment of abrasive brushes, including wire wheel brushes, end and cup brushes, radial bristle brushes, honing and tube brushes, and abrasive hand brushes.

Accessorize your actuators with floating joints, sensors, clevises and much more! These parts assist the actuators to meet application needs by enhancing alignment, mounting, sensing and attachment needs.

Available in stainless steel and low carbon steel with black oxide finish. Broad range of lengths and thread sizes to choose from.

Friction from metal blades cutting metal causes heat. It can cause enough heat that the tool bit and waste chips can weld to the surface of the workpiece, damaging the surface. Heat can also cause the workpiece to bow slightly, throwing off precision cuts, as well as shorten the life of the cutting tools. Waste from cuts, especially in industrial shops, can build up and get in the way of the machining process. Reid offers industrial quality adjustable hoses and everything to connect them, including valves, reducers, fittings, nozzles, shields and end caps. Vacuum lines can also be added to the workstation to remove chips as well as excess lubricant or coolant from the working surfaces.

Enhance the safety of processes with these dampening products. Available in adjustable force, fixed force and automatic locking types. Multiple force ratings and stroke lengths to choose from.

Alignment pins also know as aligning pins are removable locating devices used to precisely align mating workpieces in jigs and fixtures to workholders and workholding devices. Pieces are aligned by installing a pin in one part and a liner in the other.

Types of standard alignment pin handle styles include: T pins, L pins, convertible handle, and no handle.

Locking alignment pins are useful when the workholder is upside down.

6061-T6511 extruded is the most versatile of the heat treatable aluminum alloys. It has most of the good qualities of aluminum, and it offers a wide range of mechanical properties and corrosion resistance. It can be fabricated by many of the commonly used techniques. Length tolerances are ±1".

Angle plates and angle irons are used to support workpieces in vertical positions for layout, tooling, and machining applications to prevent movement and distortion.

Ball bearings are capable of rotational speeds that exceed the limits of a plain bearing. Available in sealed, shielded, metal, non-metal and open versions.

Ball knobs can be used to simply grip an appliance or provide ergonomic clamping pressure in a variety of ways. Ball knobs are commonly found on machine tools, jigs, fixtures, and control levers, or used as replacement parts to have on hand.

Our ball knobs come in a variety of shapes and materials from leading suppliers of industrial knobs, including DimcoGray, Elesa, and Kipp.

Shop for ball knobs online or in our digital catalog to ensure you get the exact part you’re after.

Base mounted plunger clamps Plunger have an extremely low height when in operation regardless of thehandle positionmaking these toggle clamps extremelt versatile when the working space is restricted.

Bevel washers are used with eye bolts to correct taper when used on I-beams and other structural applications.

Due to their tremendously high energy level, rare earth magnets are ideal for miniature applications. Popular applications include wind generation, electric motors, packaging, scientific experiments, design and display.

Works with all major screw types. The tools come as a set or individuals that feature a variety of sizes and are precision machined. They are designed to work in tight places without the added stress of drilling.

Bushings are used as spacers between pulleys and gears to prevent damage caused by vibration and dynamic loads. The durable bushing material is corrosion resistant.

One piece Bonded Mounts provide multi-directional vibration isolation, shock attenuation, and noise reduction. These fail safe mounts are easy to install and provide consistent performance when used with recommended snubbing washers.Two Piece Bonded Mounts provide multi-directional vibration isolation, shock attenuation, and noise reduction. These fail safe mounts are easy to install and provide consistent performance when used with recommended snubbing washers.

Protect your actuators and couplings from contaminants with our offering of boots and bellows. Available in round and rectangular shapes.

Bushings are used as spacers between pulleys and gears to prevent damage caused by vibration and dynamic loads. The durable bushing material is corrosion resistant.

These button hole nuts allow for quick removal and threading on long thread lengths. Great for quick change overs. Made from carbon steel. Black oxide finish.

We stock electronic cables and replacement batteries for use with our line of digital calipers.

Cam Handles also called Cam Levers, are used for clamping force that can lock at any position within its 180 degree turn to hold parts that vary slightly in dimensions. The clamp jaw pivots forward and downward simultaneously when the handle is turned to hold the work piece securely to the table.

Cam latches are commonly referred to as quarter-turn latches because they use a key, handle, or knob to turn the pawl 90 degrees to catch on the frame panel.