Reid Select Aluminum

Lobed knobs, also called clamping knobs, have a scalloped edge with four grip points to allow for maximum grip and comfort, even while wearing gloves.

These durable lobed knobs are impact- and chemical-resistant and provide a neat appearance for finished applications that require precision adjustments.

Reid Supply has a wide range of 4-lobed knobs, from plastic knobs to stainless steel and iron in a variety of thread sizes and mounting types.

Learn more about what solutions exist for your application in our article on selecting the right knobs and handles.

6-lobed prong knobs provide a symmetrical grip across a variety of materials for customizing clamping and manual adjustment of workpieces or equipment.

Our 6-arm prong knobs come in steel, aluminum, plastic, and with a variety of insert threading materials, from brass to steel.

Find the inch or metric size you need for your lobed knob needs online today.

Learn more about the differences between types of lobed knobs by visiting our knowledge center and reading how to Select the Right Knobs and Handles.

Accessorize your actuators with floating joints, sensors, clevises and much more! These parts assist the actuators to meet application needs by enhancing alignment, mounting, sensing and attachment needs.

6061-T6511 extruded is the most versatile of the heat treatable aluminum alloys. It has most of the good qualities of aluminum, and it offers a wide range of mechanical properties and corrosion resistance. It can be fabricated by many of the commonly used techniques. Length tolerances are ±1".

Ball knobs can be used to simply grip an appliance or provide ergonomic clamping pressure in a variety of ways. Ball knobs are commonly found on machine tools, jigs, fixtures, and control levers, or used as replacement parts to have on hand.

Our ball knobs come in a variety of shapes and materials from leading suppliers of industrial knobs, including DimcoGray, Elesa, and Kipp.

Shop for ball knobs online or in our digital catalog to ensure you get the exact part you’re after.

Metal Plates for Magnetic Catches provide a support to magnetically connect a catches. They come in various sizes and materials.

Chuck Jaws have jaws, (sometimes called dogs) that are arranged in a radially symmetrical pattern like the points of a star. The jaws are tightenedto hold the tool or workpiece. Often the jaws will be tightened or loosened with the help of a chuck key, which is a wrench-like tool made for the purpose.

Shaft collars have extremely diverse applications and fall into three main categories, positioners, spacers and limiters. Reid Supply has all the main types from one-piece, two-piece, hinged, set screw aand self-locking shaft collars that will fit most shaft types from round to keyed, threaded or even a support rail.

Crank handles are designed for applications that involve frequent adjustments. Click the links to find our offer of fixed crank handles, revolving crank handles, folding crank handles styles to fit your handwheel.

Reid Supply provides you with the full range of industrial and machine crank handles.

From metal, steel and plastic, choose the right material and thread size in both metric and inch.

See our Industrial and Machine Crank Handle Guide and download the detailed 28 page PDF Engineer Guide: Knobs, Handles and Handwheels for choosing the right Crank Handle for your needs.

6061-T6511 extruded is the most versatile of the heat treatable aluminum alloys. It has most of the good qualities of aluminum, and it offers a wide range of mechanical properties and corrosion resistance. It can be fabricated by many of the commonly used techniques. Length tolerances are ±1".

Flexible couplings allow for some misalignment but rotational speed may be slightly compromised. Available as both assemblies and individual components (hubs, sleeves, halves and spiders).

Fluid level indicators provide a visual guide to monitor the level of fluids on tanks or hydraulic systems.

We offer an assortment of bushings that are used with our line of gauge handles.

Gauge handles are used to hold plug gauges for go and no-go gauging. The green end holds the go gauge and the red end holds the no-go gauge. We offer both single- and double-edge gauge handles.

Plastic Control Hand Wheels with Handles provide a leveraging hand hold even when the machine operator is wearing gloves. The plastic material is durable and resists solvents, oils, grease, and other chemicals.

For metal hand wheels, the most popular are cast iron handwheels for high strength solutions while providing a sturdy hand hold during adjustment. Other materials we carry are: Aluminum, Stainless Steel and Steel.

At Reid Supply we carry the types of handwheels for your application, from two spoke to six spoke wheels, solid and safety clutch variations that work with crank handles, position indicators, levers and knobs.

See our Handwheels Product Guide and download the detailed 10 page PDF Engineer Hand Wheel Guide.

Rigging hooks are attached to chains, ropes, and slings to lift and move large loads.

Knurling comes in a variety of patterns depending on the application of the knobs you need to help clamp or adjust tools across a variety of workspaces.

Knurled knobs in vertical or diamond patterns increase grip ability, which makes it ideal for scenarios where grip may not be guaranteed due to contact with water or lubricants.

There are many types of knobs that use knurling. Explore all your options for materials and types of knobs by downloading our Guide to Knobs and Handles e-book.

Shop industry-leading DimcoGray knurled knobs of all shapes and patterns at Reid Supply.

You can learn more about the types of knurling available across knobs and handles by reading our article on common knurling types.

Free-swinging leaf hinges, also known as butt hinges, offer no resistance and consist of two flat plates joined by a pin through a center barrel.

Lift-Off Hinge for Structural SystemsLift-Off Flag Hinges - Screw on are a two part rolled steel body with round end caps. Ideal for screw on frame for more industrial unitsMetal in-line Lift Off Hinges are easy lift off for flush mounted doors. They have a hinge rotation angle of 180 degree.Metal Offset Lift Off Hinges allows simple and quick door removal with an hinge rotation angle of 180 degree. Left and right hand available.Mini Metal In-Line Lift Off Hinges available for doors opening to the left. Metric uses M4 x 0.7 screws

Polycarbonate Moisture Separators filter contaminant water, dirt, and oil out of shop air using a centrifugal spinning action. The polycarbonate bowl includes an automatic float drain to expel built up liquids inside the bowl.

Piano hinges, also called continuous hinges, run the entire length of a door or lid. They provide more stability than traditional hinges, making them ideal for heavier doors and lids that require extra support.

Recessed Female Stud Handles can be mounted flush to a door or panel with mounting studs or blind holes. Recessed handles are ideal for electrical boxes, storage cabinets, and access panels.Recessed Male Stud Handles can be mounted flush to a door or panel with mounting studs. Recessed handles are ideal for electrical boxes, access panels, computer cases, and vehicle compartments.Recessed Screw Mount Handles can be mounted flush to a door or panel with mounting studs. The flush mount is ideal for areas where a protruding handle would inhibit functionality or in limited space.Flush recessed pull handles are avilable with either mounting studs or plain for spot welding. They come in various finishes.

Folding pull handles are hinged U-shaped handles that lay flat when not in use, creating a convenient low profile while maintaining functionality. Available in free-fall, two-position, and three-position options.

Unthreaded Spacers act as a buffer to absorb vibrations and reduce noise. These spacers are ideal for use in electronic appliances and applications where movement in stationary machinery is unavoidable.

Triangular Step Blocks have long angled serrated edges that fit together so the top block is the same height as the work piece to level a set-up clamp. Step blocks are sold in pairs but a single step block can be used with a serrated step clamp.