Collets are sleeve bushings that fit into collet chucks or machine spindles and hold small diameter tool workpieces. Firmly grips the tools and workpieces to keep them from wobbling or loosening during machining. Collets are used on cnc, milling machines, lathes, grinders, and other machine tools.

Explore from a plethora of options that cater to your application needs. Air blow guns available in multiple materials, finishes, grip styles and nozzle types.

Sometimes referred to as fluted knobs, lobed knobs with 10 lobes bridge a valuable gap between lobed knobs and knurled knobs by bringing wider grips than a typical knurled knob, while increasing the number of lobes over much wider gaps in knobs with fewer lobes.

They are ideal in setups where a "soft" grip is desired for hand cranking on equipment or workpieces.

Not sure whether a knob or handle is appropriate for your setup?

Check out our Engineer Guide to Knobs, Handles, and Handwheels to find the material and style of knob or handle that works best for your project’s specifications.

Sealing Gaskets are clip on profiles offering edge protection and sealing. Essentially used on metal sheet, they offer protection from vibrations, ingress of humidity and dirt. They provide an additional seal to enclosure boxes.Simply push on exposed edges of metal, fiberglas, plastic, plywood or glass. Positive gripping locks trim in place. All products have a segmented metal core.Quick and efficient way to attach windows to frames. NEMA 12 rated safe for water and dust.

V-Blocks are attachments to grip-master vises to securely hold round or oval shapes. The hardened and ground steel material can be easily attached and adjusted.

Designed in unique shapes for maximum comfort and secure grip, clamping knobs provide good leverage and secure fastening for applications that require quick and frequent adjustment.

Plain Grip Machine Strap Clamps reach over the work piece and hold it in place for maximum pressure. These clamps are available machined from solid bar stock or tempered steel with a varnished finish.

Horizontal Manual Hold Down Clamps have a low height design, cushioned handle grip, and zinc plated components to resist corrosion. The handle and hold down bar move in opposite directions to provide secure holding capacity.

Manual Vertical Hold Down Clamps save valuable space without sacrificing holding capacity or clamp performance. A cushioned vinyl handle grip provides improved user comfort and all body and linkage components are zinc plated to resist corrosion.

The Mitutoyo standard type bore gage is available in several different inch ranges to measure inside bore diameters with accuracy to .00008”. The bore gage comes with interchangeable anvils to measure different bore diameters with the same gage. A pendulum guide structure permits the  slide of the gage for measurements while a two-point contact system detects geometry anomalies such as ovalness and taper. Large, newly designed grips are easier to hold and reduce heat transfer from the operator for better accuracy. Interchangeable anvils are constructed of alloy steel with carbide-tipped measuring faces for added accuracy and durability.

Utilizing shallow lobes, 7-arm prong knobs provide grip with both male and female threaded inserts made from high-durability brass or steel.

We carry both inch and metric sizes for hand-turn knobs with 7 lobes with plastic, steel, and other grip materials for compliance with the demands of your unique application.

Learn more about knob and handle materials in our knowledge center, or download our Knobs, Handles and Handwheels Engineer Guide.

Ball Gear Lever handles and shafts are made of steel and are ground and polished with a black oxide finish. The T-handle knob is black plastic with a brass insert making these durable levers ideal on machinery applications for changing gears through a pivot point.Oval Knob Gear Lever handles and shafts are made of steel and are ground and polished with a black oxide finish. The oval knob is black plastic with a brass insert for an comfortable grip and aesthetically pleasing finish on machinery applications for changing or shifting gears.Tapered Knob Gear Lever handles and shafts are made of steel and are ground and polished with a black oxide finish. The tapered knob is black plastic with a brass insert for an easy grip and aesthetically pleasing finish on machinery applications for changing or shifting gears.

Cam Machine Strap Clamp Assemblies have a spring loaded stud and cam lever for quick action and high holding pressure. Plain Grip Machine Strap Clamps reach over the work piece and hold it in place for maximum pressure. These clamps are available machined from solid bar stock or tempered steel with a varnished finish.

Knurling comes in a variety of patterns depending on the application of the knobs you need to help clamp or adjust tools across a variety of workspaces.

Knurled knobs in vertical or diamond patterns increase grip ability, which makes it ideal for scenarios where grip may not be guaranteed due to contact with water or lubricants.

There are many types of knobs that use knurling. Explore all your options for materials and types of knobs by downloading our Guide to Knobs and Handles e-book.

Shop industry-leading DimcoGray knurled knobs of all shapes and patterns at Reid Supply.

You can learn more about the types of knurling available across knobs and handles by reading our article on common knurling types.

Locking Paddle Latch with Right & Left LatchingProducts are flush mounting, available either all stainless steel or black powder coated with bright zinc plated slide. Maximum working load is 125lbs.Products are flush mounting, cup, paddle and cover are type 304 stainless steel. Slide is 1010 steel, chrome plated. Three grip ranges availabe. Maximum working load is 50 lbs.

Lobed knobs, also called clamping knobs, have a scalloped edge with four grip points to allow for maximum grip and comfort, even while wearing gloves.

These durable lobed knobs are impact- and chemical-resistant and provide a neat appearance for finished applications that require precision adjustments.

Reid Supply has a wide range of 4-lobed knobs, from plastic knobs to stainless steel and iron in a variety of thread sizes and mounting types.

Learn more about what solutions exist for your application in our article on selecting the right knobs and handles.

Magnetic Quick Release Pins are used in applications where a positive stop is desired. The locking pins with magnetic axial lock are used for fast and easy fixating and joining of parts and workpieces. Magnets integrated into the grip ensure axial positioning and hold the locking pin in the inserted position. Smooth surfaces and a perpendicular insertion bore have a positive effect on the retaining forces.

These wire lock pins have a pin and cotter in one assembly. The wire loop is pulled over the pin end to lock it in place or remove it. Eliminates cotter pin loss. Headed shank formed of carbon steel. Retainer wire formed of MB spring wire. Zinc plated.Self-locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Pin is carbon steel, heat-treated to Rockwell RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.

External Thread Cam Levers allow quick fastening or releasing without the use of tools and allow fine adjustments to the clamping action. The slightly arched a handle provides a comfortable grip while the external threaded stud can be easily adjusted.Internal Thread Cam Levers allow quick fastening or unfastening without the use of tools and allow fine adjustments to the clamping action. Releasing the handle disengages the lever for tightening or loosening while the insert or stud remains stationary.

Wing knobs are designed to give good leverage with minimal grip strength, making them ideal for applications that require frequent tightening and loosening, or in more precision applications.

These knobs do not require tools and can be easily adjusted using only a thumb and forefinger, similar to thumb screw knobs, but with an added arm.

We carry wing knobs in a wide variety of thread sizes from 1-inch wing knobs to 3-inch wing knobs, ensuring you'll find exactly what you need by the manufacturer you trust.

Ball knobs can be used to simply grip an appliance or provide ergonomic clamping pressure in a variety of ways. Ball knobs are commonly found on machine tools, jigs, fixtures, and control levers, or used as replacement parts to have on hand.

Our ball knobs come in a variety of shapes and materials from leading suppliers of industrial knobs, including DimcoGray, Elesa, and Kipp.

Shop for ball knobs online or in our digital catalog to ensure you get the exact part you’re after.

6-lobed prong knobs provide a symmetrical grip across a variety of materials for customizing clamping and manual adjustment of workpieces or equipment.

Our 6-arm prong knobs come in steel, aluminum, plastic, and with a variety of insert threading materials, from brass to steel.

Find the inch or metric size you need for your lobed knob needs online today.

Learn more about the differences between types of lobed knobs by visiting our knowledge center and reading how to Select the Right Knobs and Handles.

Concave push-pull knobs feature tapered shanks and an enlarged head to provide good finger clearance and an excellent grasp for pulling or lifting across a variety of specific shapes.

The concave top is more comfortable in applications that use a thumb push operation. The convex top has a smooth shape and fits comfortably into the operator’s palm for an easy grip.

We carry a large supply of push-pull knobs by manufacturers like Kipp and DimcoGray for use in all types of industrial and manufacturing applications in both inch and metric dimensions.

Shop our entire catalog of push-pull knobs online or learn more about which type of knob is right for you by reading our article on Selecting the Right Knobs and Handles.