Steel

Ideal for irregularly shaped workpieces, we offer an assortment of serrated gripper pads, as well as adjustable bolt grippers, swivel action grippers, and tapered grippers.

Clamp rest pads can be used as hardened work rests or as wear plates on your jigs and fixtures.

Rest buttons support and position workpieces from the bottom or side. Our selection includes circular, press fit, and threaded rest buttons.

Flat feet quickly and accurately align jig and fixture components on machine tables. Their large diameter and thin cross section make them idea for many applications. Cap screw included.

Used on milling machines and drill presses, our push-button stop nuts and clip-on quill stops create a physical barrier to prevent over boring of a hole.

Machine screw jacks are height adjustable and used to support elevated areas of a workpiece. We also carry ball-shaped and V-shaped screw jack pads.

Height adjustment bolts are used when dealing with the positioning and alignment of motors, motor units, drive components and production lines.

Our T-handle knobs have steel studs that easily fit into either male- or female-threaded applications, creating an easily gripped knob or handle with an ergonomic design.

The T-handle design provides a strong handhold for quickly adjusting controls or as a kind of lever to open and close equipment.

Shop Reid Select’s complete supply of T knobs online today or call our team to order the specific part you’re looking for.

T-handle knobs can also be used for clamping applications if needed. We carry both inch and metric T-handle knobs in a variety of materials and sizes.

Learn what makes T-handle knobs ideal for certain applications in our article on Knob Materials, Applications, and Types.

Bolt-on Horizontal Latch Plates work with pull action latch clamps to provide a positive gripping power and lock the connection. These clamps are made of durable steel or stainless steel.

Collets are sleeve bushings that fit into collet chucks or machine spindles and hold small diameter tool workpieces. Firmly grips the tools and workpieces to keep them from wobbling or loosening during machining. Collets are used on cnc, milling machines, lathes, grinders, and other machine tools.

Sometimes referred to as fluted knobs, lobed knobs with 10 lobes bridge a valuable gap between lobed knobs and knurled knobs by bringing wider grips than a typical knurled knob, while increasing the number of lobes over much wider gaps in knobs with fewer lobes.

They are ideal in setups where a "soft" grip is desired for hand cranking on equipment or workpieces.

Not sure whether a knob or handle is appropriate for your setup?

Check out our Engineer Guide to Knobs, Handles, and Handwheels to find the material and style of knob or handle that works best for your project’s specifications.

V-Blocks are attachments to grip-master vises to securely hold round or oval shapes. The hardened and ground steel material can be easily attached and adjusted.

Designed in unique shapes for maximum comfort and secure grip, clamping knobs provide good leverage and secure fastening for applications that require quick and frequent adjustment.

Plain Grip Machine Strap Clamps reach over the work piece and hold it in place for maximum pressure. These clamps are available machined from solid bar stock or tempered steel with a varnished finish.

Horizontal Manual Hold Down Clamps have a low height design, cushioned handle grip, and zinc plated components to resist corrosion. The handle and hold down bar move in opposite directions to provide secure holding capacity.

Manual Vertical Hold Down Clamps save valuable space without sacrificing holding capacity or clamp performance. A cushioned vinyl handle grip provides improved user comfort and all body and linkage components are zinc plated to resist corrosion.

Ball Gear Lever handles and shafts are made of steel and are ground and polished with a black oxide finish. The T-handle knob is black plastic with a brass insert making these durable levers ideal on machinery applications for changing gears through a pivot point.Oval Knob Gear Lever handles and shafts are made of steel and are ground and polished with a black oxide finish. The oval knob is black plastic with a brass insert for an comfortable grip and aesthetically pleasing finish on machinery applications for changing or shifting gears.Tapered Knob Gear Lever handles and shafts are made of steel and are ground and polished with a black oxide finish. The tapered knob is black plastic with a brass insert for an easy grip and aesthetically pleasing finish on machinery applications for changing or shifting gears.

Cam Machine Strap Clamp Assemblies have a spring loaded stud and cam lever for quick action and high holding pressure. Plain Grip Machine Strap Clamps reach over the work piece and hold it in place for maximum pressure. These clamps are available machined from solid bar stock or tempered steel with a varnished finish.

Knurling comes in a variety of patterns depending on the application of the knobs you need to help clamp or adjust tools across a variety of workspaces.

Knurled knobs in vertical or diamond patterns increase grip ability, which makes it ideal for scenarios where grip may not be guaranteed due to contact with water or lubricants.

There are many types of knobs that use knurling. Explore all your options for materials and types of knobs by downloading our Guide to Knobs and Handles e-book.

Shop industry-leading DimcoGray knurled knobs of all shapes and patterns at Reid Supply.

You can learn more about the types of knurling available across knobs and handles by reading our article on common knurling types.

Lobed knobs, also called clamping knobs, have a scalloped edge with four grip points to allow for maximum grip and comfort, even while wearing gloves.

These durable lobed knobs are impact- and chemical-resistant and provide a neat appearance for finished applications that require precision adjustments.

Reid Supply has a wide range of 4-lobed knobs, from plastic knobs to stainless steel and iron in a variety of thread sizes and mounting types.

Learn more about what solutions exist for your application in our article on selecting the right knobs and handles.

Wing knobs are designed to give good leverage with minimal grip strength, making them ideal for applications that require frequent tightening and loosening, or in more precision applications.

These knobs do not require tools and can be easily adjusted using only a thumb and forefinger, similar to thumb screw knobs, but with an added arm.

We carry wing knobs in a wide variety of thread sizes from 1-inch wing knobs to 3-inch wing knobs, ensuring you'll find exactly what you need by the manufacturer you trust.

Ball knobs can be used to simply grip an appliance or provide ergonomic clamping pressure in a variety of ways. Ball knobs are commonly found on machine tools, jigs, fixtures, and control levers, or used as replacement parts to have on hand.

Our ball knobs come in a variety of shapes and materials from leading suppliers of industrial knobs, including DimcoGray, Elesa, and Kipp.

Shop for ball knobs online or in our digital catalog to ensure you get the exact part you’re after.

Concave push-pull knobs feature tapered shanks and an enlarged head to provide good finger clearance and an excellent grasp for pulling or lifting across a variety of specific shapes.

The concave top is more comfortable in applications that use a thumb push operation. The convex top has a smooth shape and fits comfortably into the operator’s palm for an easy grip.

We carry a large supply of push-pull knobs by manufacturers like Kipp and DimcoGray for use in all types of industrial and manufacturing applications in both inch and metric dimensions.

Shop our entire catalog of push-pull knobs online or learn more about which type of knob is right for you by reading our article on Selecting the Right Knobs and Handles.