Steel

Fixture keys are used to locate jigs and fixtures on slotted machine tool tables and position the part to be machined in one operation. Our selection of fixture keys includes block keys and sine keys.

Built to reduce design and detail time, CMM fixture blocks and plates provide a work base with a combination of standard size mounting holes for positioning.

Quick change fixture mounting systems provide fast installation with precise location to help reduce setup and changeover times. We offer quick change liners, bushings, shanks, and repair kits.

Hook Clamp Assemblies are ideal for use on jig and fixture quick build systems to generate holding power in close quarters with direct downward clamping force. The hook clamp easily swings out of the way for unloading once released.

Triangular Step Blocks have long angled serrated edges that fit together so the top block is the same height as the work piece to level a set-up clamp. Step blocks are sold in pairs but a single step block can be used with a serrated step clamp.

Hardened and ground Wedge Clamps can product holding forces over 19,000 lbs. The cross-wedge construction allows the clamp to lock firmly in every direction as it is tightened down. Wedge Clamps are available with single or double wedge.

Knife Cam Edge Clamps can be used for clamping rough cut stock, castings and any material that requires a hardened clamping element.

ID Expansion Clamps are excellent for palletized setups in secondary operations on lathe parts. These clamps are made of mild steel for machinability to size on lathe or mill and allow more parts per work cube or fixture plate.

Available in stainless steel and low carbon steel with black oxide finish. Broad range of lengths and thread sizes to choose from.

Cam Machine Strap Clamp Assemblies have a spring loaded stud and cam lever for quick action and high holding pressure. Plain Grip Machine Strap Clamps reach over the work piece and hold it in place for maximum pressure. These clamps are available machined from solid bar stock or tempered steel with a varnished finish.

Cam Handle Edge Clamps lock positively at any position within its 180 degree turn to hold parts that vary slightly in dimensions. The clamp jaw pivots forward and downward simultaneously when the handle is turned to hold the work piece securely to the table.

Flange Nut Machine Strap Clamp Asseblies have a spring loaded stud and cam lever for quick action and high holding pressure. These assemblies are ideal for holding plain surface work where quick movements are required in a restricted space.

Designed for light-duty clamping, the hand knob eliminates wrenching for faster work changes. Spherical washer allows for clamping irregular surfaces.

Plain Grip Machine Strap Clamps reach over the work piece and hold it in place for maximum pressure. These clamps are available machined from solid bar stock or tempered steel with a varnished finish.

Edge and Toe Clamps provide positive down force while using very little space on a fixture.

Cam Handles also called Cam Levers, are used for clamping force that can lock at any position within its 180 degree turn to hold parts that vary slightly in dimensions. The clamp jaw pivots forward and downward simultaneously when the handle is turned to hold the work piece securely to the table.

Clamp rest pads can be used as hardened work rests or as wear plates on your jigs and fixtures.

Adjustable locating screws are used with locating pins to accurately position workpieces in jigs and fixtures.

Ball knobs can be used to simply grip an appliance or provide ergonomic clamping pressure in a variety of ways. Ball knobs are commonly found on machine tools, jigs, fixtures, and control levers, or used as replacement parts to have on hand.

Our ball knobs come in a variety of shapes and materials from leading suppliers of industrial knobs, including DimcoGray, Elesa, and Kipp.

Shop for ball knobs online or in our digital catalog to ensure you get the exact part you’re after.

Alignment pins also know as aligning pins are removable locating devices used to precisely align mating workpieces in jigs and fixtures to workholders and workholding devices. Pieces are aligned by installing a pin in one part and a liner in the other.

Types of standard alignment pin handle styles include: T pins, L pins, convertible handle, and no handle.

Locking alignment pins are useful when the workholder is upside down.

Plumbing and hosing for pneumatic/hydraulic applications is an integral but complicated task in the manufacturing process. Reid Supply has a broad selection of vibration dampening and noise cancelling hose clamps that will enable you clamp your hoses ergonomically in multiple orientations around your site. Also featuring electrically insulated and corrosion-resistant products.

Control Knobs with Markings are ideal on applications that require fine, precise position adjustments. These knobs are designed with an ergonomically shaped knurled rim and indicator mark for accurate setting and adjustment.Control Knobs with Arrows are ideal on applications that require fine, precise position adjustments. These knobs are designed with an ergonomically shaped knurled rim and easily legible laser engraved arrow for accurate setting and adjustment.

Clamping levers are used for applications that require greater torque power than a standard lever, we carry a broad selection of heavy-duty steel clamping levers in a variety of configurations, including high profile or low profile, straight arm or offset arm, and single arm or double arm.

The Actima clamping device is self-locking and designed for smooth, precise clamping that is both repeatable and very forceful. It can be used for thrust or tension clamping, and is ideal to build into clamping fixtures, such as a teeter-totter. The clamping plunger of every Actima clamp has a travel of 12 mm.

Reid Supply offers left hand and right hand thrust and pull Actima handles along with a variety of mounting hardware and accessories for toggle clamps of all diameters and latching applications

Flanged plunger clamper with push/pull action are part of this standard striaght line action toggle clamp