The fixture provide a simple and low-profile solution for clamping cylindrical workpieces. Standard ER40 collets (not included) can be housed within the fixture. Coller nuts and mounting studs are included.

Fixture keys are used to locate jigs and fixtures on slotted machine tool tables and position the part to be machined in one operation. Our selection of fixture keys includes block keys and sine keys.

Fixture jacks are a positive locking jack for irregular clamping to achieve various heights requiring a positive pressure stop. They are adjustable to fit height irregularities of milling operations.

Built to reduce design and detail time, CMM fixture blocks and plates provide a work base with a combination of standard size mounting holes for positioning.

Quick change fixture mounting systems provide fast installation with precise location to help reduce setup and changeover times. We offer quick change liners, bushings, shanks, and repair kits.

Hex Cam Edge Clamps lock positively at any position within its 180 degree turn to hold parts that vary slightly in dimensions. The clamp jaw pivots forward and downward simultaneously when the handle is turned to hold the work piece securely to the table.

Hardened and ground Wedge Clamps can product holding forces over 19,000 lbs. The cross-wedge construction allows the clamp to lock firmly in every direction as it is tightened down. Wedge Clamps are available with single or double wedge.

Designed for light-duty clamping, the hand knob eliminates wrenching for faster work changes. Spherical washer allows for clamping irregular surfaces.

Protect your set-up clamps with these supports. Includes washer, spring and shaft collar. Black oxide finish on washer. Choose from various diameters.

ID Expansion Clamps are excellent for palletized setups in secondary operations on lathe parts. These clamps are made of mild steel for machinability to size on lathe or mill and allow more parts per work cube or fixture plate.

Cam Machine Strap Clamp Assemblies have a spring loaded stud and cam lever for quick action and high holding pressure. Plain Grip Machine Strap Clamps reach over the work piece and hold it in place for maximum pressure. These clamps are available machined from solid bar stock or tempered steel with a varnished finish.

Available in stainless steel and low carbon steel with black oxide finish. Broad range of lengths and thread sizes to choose from.

Knife Cam Edge Clamps can be used for clamping rough cut stock, castings and any material that requires a hardened clamping element.

Cam Handle Edge Clamps lock positively at any position within its 180 degree turn to hold parts that vary slightly in dimensions. The clamp jaw pivots forward and downward simultaneously when the handle is turned to hold the work piece securely to the table.

Hook Clamp Assemblies are ideal for use on jig and fixture quick build systems to generate holding power in close quarters with direct downward clamping force. The hook clamp easily swings out of the way for unloading once released.

Flange Nut Machine Strap Clamp Asseblies have a spring loaded stud and cam lever for quick action and high holding pressure. These assemblies are ideal for holding plain surface work where quick movements are required in a restricted space.

The kit is housed in a strong metal holder that can be mounted or can stand on a bench. Kit includes: 6 T-slot nuts, 24 studs, 4 flange nuts, 4 coupling nuts, 12 step blocks, 6 step clamps, 1 T-slot cleaner and 1 metal stand.

Edge and Toe Clamps provide positive down force while using very little space on a fixture.

Plain Grip Machine Strap Clamps reach over the work piece and hold it in place for maximum pressure. These clamps are available machined from solid bar stock or tempered steel with a varnished finish.

Cam Handles also called Cam Levers, are used for clamping force that can lock at any position within its 180 degree turn to hold parts that vary slightly in dimensions. The clamp jaw pivots forward and downward simultaneously when the handle is turned to hold the work piece securely to the table.

Triangular Step Blocks have long angled serrated edges that fit together so the top block is the same height as the work piece to level a set-up clamp. Step blocks are sold in pairs but a single step block can be used with a serrated step clamp.

Clamp rest pads can be used as hardened work rests or as wear plates on your jigs and fixtures.

Adjustable locating screws are used with locating pins to accurately position workpieces in jigs and fixtures.

Spring stops, also referred to as spring stop buttons, are light fixturing components used to hold a work piece against a locating surface prior to clamping. They consist of a flanged mounting body and a spring-loaded plunger. Also known as spring loaded stops, these tooling components work well with Spring Plungers and Jig and Fixtures.

Choose between Rectangular, Slot Holes, and Triangular base styles for the best spring stops

Alignment pins also know as aligning pins are removable locating devices used to precisely align mating workpieces in jigs and fixtures to workholders and workholding devices. Pieces are aligned by installing a pin in one part and a liner in the other.

Types of standard alignment pin handle styles include: T pins, L pins, convertible handle, and no handle.

Locking alignment pins are useful when the workholder is upside down.