Starrett Steel

Blade rulers provide accurate measurements and can function as a useful straight edge for many applications. Available in steel and stainless steel, inch and metric, horizontal and vertical. Some types feature a permanent self-adhesive strip.

Depth gauges measure the depth of holes, counterbores, slots, and other recesses.

Outside micrometers are used for measuring the thickness or outside diameter of small parts or fittings with high accuracy. Similar in appearance to a C-clamp, the object to be measured is clamped between the anvil (the stationary end of the clamp) and the spindle (the moving part of the clamp). The clamp opens and closes by turning an internal screw. On analog micrometers, measurement is calculated by reading the lines and numbering system that appears on the thimble and sleeve.

Feeler gauges are a vital tool for checking valve tolerance, point gaps, and other narrow slots.

Hole saws are used for making large hold diameters because they can do the job quicker than standard drill bits. We offer an assortment of hole saws, as well as pilot drills and arbors.

We offer a selection of accessories for use with our line of dial and digital indicators. Products include contact points, connecting cable, magnetic stands, and swivel joints.

Machine screw jacks are height adjustable and used to support elevated areas of a workpiece. We also carry ball-shaped and V-shaped screw jack pads.

Measuring squares consist of two straight edges set at a 90-degree angle to each other. The primary purpose of these measuring tools is to check the accuracy of right angles to ensure that components remain perpendicular. Similarly, protractors are a measurement device used to measure angles.

Made of dimensionally stable chromium, tungsten and vanadium electric furnace tool steel. Low 1,450-1,500 Fahrenheit hardening range makes this steel easy to harden. Vanadium content assures fine grain and high durability. Fully spheroidized and annealed for uniform carbide size and easy machining. Each piece is individually wrapped and clearly marked with size, analysis and correct hardness and tempering information. Edge squareness is .003″ per inch. Finish is 35 microinch or finer.

We carry an assortment of tapping tools, such as hand tappers, tap extractors, and tap wrenches.

Thickness gauges are used to measure the thickness of sheet metals, pipe, tubing, wire, and other materials.