Metal

Accessorize your actuators with floating joints, sensors, clevises and much more! These parts assist the actuators to meet application needs by enhancing alignment, mounting, sensing and attachment needs.

Cam latches are commonly referred to as quarter-turn latches because they use a key, handle, or knob to turn the pawl 90 degrees to catch on the frame panel.

Designed in unique shapes for maximum comfort and secure grip, clamping knobs provide good leverage and secure fastening for applications that require quick and frequent adjustment.

Adjustable Compression Latches are IP65 rated and are made from either Chrome or Black Powder Coated Die-Cast Zinc. They offer a 6mm compression and there are 3 cam styles available; either flat, offset or deep. The cam can be used forward or reversed and the latch provides good compression and noise isolation. The 2 fixing sizes available are 20.2mm x 22.2mm and 19.2mm x 22.2mmAdjustable Compression Latches w/Wing Knob are used for cabinets that require better sealing under vibration. The range comes in a choice of finish and are available in locking and non locking versions.

Crank handles are designed for applications that involve frequent adjustments. Click the links to find our offer of fixed crank handles, revolving crank handles, folding crank handles styles to fit your handwheel.

Reid Supply provides you with the full range of industrial and machine crank handles.

From metal, steel and plastic, choose the right material and thread size in both metric and inch.

See our Industrial and Machine Crank Handle Guide and download the detailed 28 page PDF Engineer Guide: Knobs, Handles and Handwheels for choosing the right Crank Handle for your needs.

Reid Supply offers disc and cylindrical magnets primarily in Neodymium, Alnico and Ceramic models. Neodymium magnets are powerful, yet compact. Alnico magnets are ideal for high heat applications and cermanic magnets are generally the most economical. Applications are abundant: fixtures, jigs, panel mounts, end of retrieving tools, catches/latches, linear actuators, sensing, gyroscopes, flow meters, pacemakers, etc.

Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more.

Mount your gas springs with ease with our ball and eyelet type end fittings and mounting brackets. Various materials to choose from!

Hex drive thread inserts create sturdy machine threads in soft woods. The are designed for applications where frequent assembly or disassembly could lead to thread erosion or stripping.

Knife Thread inserts for hard wood significantly reduce the possibility of stripping when using a threaded fasteners in materials such as oak, cherry, and maple. Ideal for applications ranging from furniture to cabinetry to storm shutters.

Kit can be used with any 5⁄16" square shanked handles for two point locking. Kit includes two gold zinc plated steel rods, two plastic rod guides, steel cam, two steel bushings, two wave washers, and three set screws. The Quarter Turn lock range is supplied with a range of accessories including fixing rings. These are supplied in two different types; one in Spring Steel and the other in Die Cast Zinc. They are suitable for all locks with a 20.2 x 22.2 fixing hole. These are quarter turn latch accessories. Available in 3 styles; 2 are latch hooks and 1 is a latch finger pull. Latch and Lock Keys are specific to their parent part for additional security and will often need to be ordered separately. All of the keys for our locks and latches are available here.

Free-swinging leaf hinges, also known as butt hinges, offer no resistance and consist of two flat plates joined by a pin through a center barrel.

Lift-Off Hinge for Structural SystemsLift-Off Flag Hinges - Screw on are a two part rolled steel body with round end caps. Ideal for screw on frame for more industrial unitsMetal in-line Lift Off Hinges are easy lift off for flush mounted doors. They have a hinge rotation angle of 180 degree.Metal Offset Lift Off Hinges allows simple and quick door removal with an hinge rotation angle of 180 degree. Left and right hand available.Mini Metal In-Line Lift Off Hinges available for doors opening to the left. Metric uses M4 x 0.7 screws

These plates are grooved to be able to hold round parts as well. The plates are also notched for holding parts above base of vise. Smooth on back side. They are accurately machined, hardened and ground. Constructed of plates or channels with magnets sandwiched in between. Ideal for holding heavy parts. Effective holding against shear force.

With springs being such an integral part of power transmission applications, Reid Supply has about every kind of spring: compression springs, die springs, solid springs, drawbar springs, extension springs, torsion springs, etc.

Mounted bearings and housings with rolling bearings support a rotating shaft, which can be bolted on a machine frame or any other substurcture. There is no need to precisely machine a bearing housing in a surrounding casing. This makes these solutions cost-efficient and easy to use, while providing full rolling bearing performance.

Position-indicating hand wheels and position counters are designed to accurately display the position of a control shaft and valve that enables the operator to return to these exact settings without guesswork.

There are different types of position indicators, including mechanical position indicators, shaft position indicators, and handwheel indicators. We also have electronic position indicators. We offer both clockwise and counter clockwise rotation counters. Knurled control knobs are your most common position indicator accessory.

See our Position Indicator Guide and download the detailed 10 page PDF Engineer Hand Wheel Guide for choosing the right indicator for your needs.

Concave push-pull knobs feature tapered shanks and an enlarged head to provide good finger clearance and an excellent grasp for pulling or lifting across a variety of specific shapes.

The concave top is more comfortable in applications that use a thumb push operation. The convex top has a smooth shape and fits comfortably into the operator’s palm for an easy grip.

We carry a large supply of push-pull knobs by manufacturers like Kipp and DimcoGray for use in all types of industrial and manufacturing applications in both inch and metric dimensions.

Shop our entire catalog of push-pull knobs online or learn more about which type of knob is right for you by reading our article on Selecting the Right Knobs and Handles.

The kit is housed in a strong metal holder that can be mounted or can stand on a bench. Kit includes: 6 T-slot nuts, 24 studs, 4 flange nuts, 4 coupling nuts, 12 step blocks, 6 step clamps, 1 T-slot cleaner and 1 metal stand.

Shank latches have a T-shaped or L-shaped handle that turns the pawl to hook or unhook it from the frame panel.

Slam latches, also known as push-to-close latches, provide a hands-free method of closing a door or panel. The sprung cam lifts and returns when the door is closed. As the panel door is pushed to, the cam rises and then springs down behind the panel wall.Push Button Latches have a push button opening and a slam shut action. They are single hole installation for added ease and suit various panel thicknesses.

Tape rulers, commonly known as measuring tapes, are flexible rules used to measure size or distance. We offer an assortment of tape rules in lengths from 12 feet to 33 feet.

Tooling balls are used as a reference point for inspection, layout, and machining applications. We offer tooling balls with or without a shoulder.

Vibration Insulator Strips can be cut to the correct size to fit your application. The continuous strips have Elastomer that is 50 durometer neoprene to provide controlled deflection, isolation, and noise reduction.