EMKA

Cam latches are commonly referred to as quarter-turn latches because they use a key, handle, or knob to turn the pawl 90 degrees to catch on the frame panel.

Concealed hinges are not visible from the outside of a door or panel and therefore provide a clean profile and tamper resistance.

Door Stops hold door open at specific angle and prevents door from opening too far. When door is open fully, catch will hold door in place. To release door, push open slightly and catch is released.

Sealing Gaskets are clip on profiles offering edge protection and sealing. Essentially used on metal sheet, they offer protection from vibrations, ingress of humidity and dirt. They provide an additional seal to enclosure boxes.Simply push on exposed edges of metal, fiberglas, plastic, plywood or glass. Positive gripping locks trim in place. All products have a segmented metal core.Quick and efficient way to attach windows to frames. NEMA 12 rated safe for water and dust.

Contractor Pack is a closed cell blend of neoprene, nitrile, and PVC. It has excellent ozone and oxidation resistance, well suited for outdoor applications, and is cost effective for HVAC.

Kit can be used with any 5⁄16" square shanked handles for two point locking. Kit includes two gold zinc plated steel rods, two plastic rod guides, steel cam, two steel bushings, two wave washers, and three set screws. The Quarter Turn lock range is supplied with a range of accessories including fixing rings. These are supplied in two different types; one in Spring Steel and the other in Die Cast Zinc. They are suitable for all locks with a 20.2 x 22.2 fixing hole. These are quarter turn latch accessories. Available in 3 styles; 2 are latch hooks and 1 is a latch finger pull. Latch and Lock Keys are specific to their parent part for additional security and will often need to be ordered separately. All of the keys for our locks and latches are available here.

Free-swinging leaf hinges, also known as butt hinges, offer no resistance and consist of two flat plates joined by a pin through a center barrel.

Heavy Duty Telescopic Lid Stays are ideal for holding open lids, electric panel and inspection covers. They are suitable for heavy duty applications. The range offers left or right hand versions, and a choice of materials.Folding Lid Stays are ideal for holding open lids, electric panel and inspection covers. Can be used as left or right hand in a choice of materials.Folding Lid Stays are ideal for holding open lids, electric panel and inspection covers. The range offers left and right hand version in a choice of materials.

Pull handles are commonly used to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. Options include one-piece handles or multiple-piece assemblies.

Recessed Female Stud Handles can be mounted flush to a door or panel with mounting studs or blind holes. Recessed handles are ideal for electrical boxes, storage cabinets, and access panels.Recessed Male Stud Handles can be mounted flush to a door or panel with mounting studs. Recessed handles are ideal for electrical boxes, access panels, computer cases, and vehicle compartments.Recessed Screw Mount Handles can be mounted flush to a door or panel with mounting studs. The flush mount is ideal for areas where a protruding handle would inhibit functionality or in limited space.Flush recessed pull handles are avilable with either mounting studs or plain for spot welding. They come in various finishes.

Side Hinges offer a rotational angle of 180 degrees. Types 1 and 2 are high resistance hinges for medium and heavy door panels. They also offer high security and are assembled using the special screws provided. Type 3 is a lower cost lower security alternative

Slam latches, also known as push-to-close latches, provide a hands-free method of closing a door or panel. The sprung cam lifts and returns when the door is closed. As the panel door is pushed to, the cam rises and then springs down behind the panel wall.Push Button Latches have a push button opening and a slam shut action. They are single hole installation for added ease and suit various panel thicknesses.

Spring loaded latches are simple to install, heavy duty locking devices available in 2 different styles. Style A would be used in a "Pull shut" application while Style B would be used in a "Push Shut" application.Slam Action Slide Latches. Ideal for corrisive environment applications. Simply lift the knob, slide it over and drop it into the notch.Gate latches are designed to accommodate a padlock (not included) security in corrosive environments.

Steel, Aluminium and Stainless Steel Weld on Hinges operate by a very simple design. The Steel versions are available with either a steel or brass pin and are extremely versatile in terms of their application uses. They are available with or without a grease nipple and come in 2 different types. The Aluminium version comes with a stainless steel washers and also in 2 different types