Horizontal Manual Hold Down Clamps have a low height design, cushioned handle grip, and zinc plated components to resist corrosion. The handle and hold down bar move in opposite directions to provide secure holding capacity.

Manual Through Hole Push Pull Clamps have a single hole threaded mount to permit rotation in any direction. This design allows complete flexibility in the fixture in a compact design while securely holding materials in place during production.

Manual Push Pull Clamps have a single hole threaded mount to permit rotation in any direction. This design allows complete flexibility in the fixture in a compact design while securely holding materials in place during production.

Flat feet quickly and accurately align jig and fixture components on machine tables. Their large diameter and thin cross section make them idea for many applications. Cap screw included.

Ball knobs can be used to simply grip an appliance or provide ergonomic clamping pressure in a variety of ways. Ball knobs are commonly found on machine tools, jigs, fixtures, and control levers, or used as replacement parts to have on hand.

Our ball knobs come in a variety of shapes and materials from leading suppliers of industrial knobs, including DimcoGray, Elesa, and Kipp.

Shop for ball knobs online or in our digital catalog to ensure you get the exact part you’re after.

Designed in unique shapes for maximum comfort and secure grip, clamping knobs provide good leverage and secure fastening for applications that require quick and frequent adjustment.

Blank Clamp Arms are designed to allow custom arms to be attached to the piston rod of power swing clamps with tapered rod ends.

These modular elements can be positioned and tightened without removing the swing cylinder from the fixture. Can be mounted with a bolt or through compression method depending on the arm type.

Ergonomic Toggle Clamp Handle Grips provide a safe and comfortable gripping surface for vertical hold down clamps. These accessory parts act a guard and help protect against potential pinch points.

Power Clamp Toggle Lock Clamp Switches send signals from the power clamp to a programmable controller or electronic device. The switch is activated by a magnetic ring that closes the contact and sends a signal as it moves under the switch.

Power Clamp Mounting Blocks provide recessed mounting capability for power swing clamps. These blocks are made of lightweight red anodized aluminum with variable height adjustment.

Tapered knobs are commonly found on machine tools, jigs, fixtures, and control levers, sometimes preferred due to the shape of the apparatus or end products.

Tapered knobs come in female and male threaded insert as well as press-on applications. We carry knobs by DimcoGray, Kipp, and Rogan so you can always find exactly the product you're looking for.

Reid Supply has a complete library of industrial tapered knobs, including these styles:

• Mushroom Head
• Oval
• Oval Tapered
• Ribbed Tapered
• Ergonomic Style Tapered
  

Learn more about the different types of knobs available for your project’s specifications by reading our article on Selecting the Right Knobs and Handles.

Locating pins are used for controlled, tight tolerances to increase accuracy in positioning workpieces on fixtures. Typically, two pins are needed to properly align the workpiece. We offer round pins that provide precise location in all directions, as well as relieved or diamond pins that provide clearance with less contact to prevent binding during loading and unloading. These can be used in many different applications including clamping tables, fixture plates, v-blocks and other common shop tools.

The most common types of fixture locating pins are: threaded locating pins, diamond locating pins, with bullet nose and pin liners.

Stock crowders provide positive alignment of stock in dies and fixtures. Saves pilots anc can be easily removed for die sharpening.

Drill bushings or drill guides are installed into a drilling jig to guide, support, and position a drill or other cutting tool during metalworking tasks.
Also known as drill guide bushings, or drill jig bushings these machine tools and their accessories work well with your end mills, and digital micrometers.

Reid Supply is a full line distributor from the top manufactures, the most common types of Drill Bushings are fixed or press-fit bushings, head press fit, threaded drill bushings, united and metric drill bushings.

Comprised of plunger sleeves, detents, mounting blocks, flanges, washers, installation tools and lock nuts. Compatible with a wide variety of spring loaded devices and tooling components. Ideal for fixtures.

Featuring base plates, vise jaws and mounting studs to transform your workholding fixture to a modular system. The accessories can assist in switching out between various vises and collet fixtures. Vise jaws are available in steel and aluminum forms. Base plates are available in different shapes and sizes. Assembly is extremely simple with minimal tools required.

Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element

Reid Supply's range of Flanged Index plungers have a flange with screw holes for extra fastening. They are ideal for use on thin materials.Locking Threaded Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables. They have a 90 locking rest position. They are used for locating, positioning, indexing and securing on applications such as gym equipment, medical aids, catering equipment, conveyors etc.Non-Locking Threaded Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables. They are used for locating, positioning, indexing and securing on applications such as gym equipment, medical aids, catering equipment, conveyors etc.Weld On Index Plungers

Dovetail slides typically have a larger contact area as compared to other sliding assemblies, providing a high stiffness and load bearing capacity. The dovetail interconnects the saddle and base and guides the travel of the saddle. Dovetail slides can be preloaded with the gib adjustment for increased friction. Applications include automation, shuttle devices, fixtures, work holding and press loading

Turntable bearings are ideal for swivel displays, welding tables, industrial assemblies. May be mounted using the recommended bolts or welded directly to the fixture.

Easy custom mounting for left and right-handed operation. Comes in 2 different colors.

External hold open device ensures safe opening operation. Comes in 3 different sizes

Flat Tip Bonded Neoprene Spindle Assemblies provide an alternative choice to the spindle provided with the toggle clamp. The steel spindle is durable while the flat neoprene tip minimizes marking fragile or polished surfaces.

Hex Head Spindle Assemblies provide an alternative choice to the spindle provided with the toggle clamp. These assemblies have a stainless steel, steel, or nylon bolt that acts as the spindle cap and is supplied with two jam nuts.