Reid Supply offers disc and cylindrical magnets primarily in Neodymium, Alnico and Ceramic models. Neodymium magnets are powerful, yet compact. Alnico magnets are ideal for high heat applications and cermanic magnets are generally the most economical. Applications are abundant: fixtures, jigs, panel mounts, end of retrieving tools, catches/latches, linear actuators, sensing, gyroscopes, flow meters, pacemakers, etc.

Plumbing and hosing for pneumatic/hydraulic applications is an integral but complicated task in the manufacturing process. Reid Supply has a broad selection of vibration dampening and noise cancelling hose clamps that will enable you clamp your hoses ergonomically in multiple orientations around your site. Also featuring electrically insulated and corrosion-resistant products.

C-Clamps include a flat surface top that is used as the stationary jaw while a threaded stud is screwed through the top with a rotating pad on one end and a T-handle on the other. Force is applied by holding the clamp over the work piece and turning the T-handle upwards.

Control Knobs with Markings are ideal on applications that require fine, precise position adjustments. These knobs are designed with an ergonomically shaped knurled rim and indicator mark for accurate setting and adjustment.Control Knobs with Arrows are ideal on applications that require fine, precise position adjustments. These knobs are designed with an ergonomically shaped knurled rim and easily legible laser engraved arrow for accurate setting and adjustment.

Clamping levers are used for applications that require greater torque power than a standard lever, we carry a broad selection of heavy-duty steel clamping levers in a variety of configurations, including high profile or low profile, straight arm or offset arm, and single arm or double arm.

The Actima clamping device is self-locking and designed for smooth, precise clamping that is both repeatable and very forceful. It can be used for thrust or tension clamping, and is ideal to build into clamping fixtures, such as a teeter-totter. The clamping plunger of every Actima clamp has a travel of 12 mm.

Reid Supply offers left hand and right hand thrust and pull Actima handles along with a variety of mounting hardware and accessories for toggle clamps of all diameters and latching applications

Spindle Bar Clamps are easy to use by sliding the moveable arm into position and tightening the screw spindle for instant clamping at any opening. The deep throat allows for greater reach and saves time over ordinary C-Clamps.

Flanged plunger clamper with push/pull action are part of this standard striaght line action toggle clamp

Sometimes also call a draw latces, this T-handle draw clamp from Reid Supply is a light weight latch made from durable construction and built for heavy duty applications

Manual Swing Clamps are easy-to-use options for fixture building/testing, welding and assembly operations in the industrial, aerospace, and automotive markets. They provide quick swing-and-clamp movement for increased productivity. The new Manual Swing Clamps feature an enclosed cam track that can clamp and toggle-lock in the pull down closed position. They also feature a detent that holds the clamp in the open position in order to prevent unwanted movement.

Manuel Plier Clamps have a pivoting jaw to allow a large depth when clamping awkward profiles. The jaw spindle can be pre-set during repetitious action to achieve the optimum clamping distance and pressure.

These latch clamps feature controlled motion, single handed operation, and secure toggle locking action. After simple installation and set-up, these clamps stay out of your way with an intuitive clamp hook/arm movement. Common applications and uses include - molding, assembly, and closures for doors, lids, or covers.

provide quick swing-and-clamp movement for increased productivity via a pneumatic cylinder.

Squeeze Action Bar Clamps are ideal for clamping in front, behind, or at the side of the rail. The convenient one-handed operation includes the handle with pump lever parallel to the rail to easily change from clamping to spreading by twisting the dial with no disassembly.

Base mounted plunger clamps Plunger have an extremely low height when in operation regardless of thehandle positionmaking these toggle clamps extremelt versatile when the working space is restricted.

Hydraulic Cylindrical Swing Clamps have 90 degree left or right handed rotation. The metal treated bodies with upper flanges stand up to wear and corrosion while the piston rod is hardened for added strength.

Wire rope clamps, also called cable clamps or U-bolt clips, are used to fix the loose end of a wire rope after it has been looped to form an eye. These clamps consist of a U-shaped bolt and a saddle with two nuts. Two layers of wire rope are placed inside the U-bolt and two or three clamps are required to properly secure the looped end to the rope.

Pneumatic Push Pull Clamps are used to apply pressure vertically in a straight-line action. Use clamps to wedge your project up against a rail or pair with another push pull clamp to apply force against each other in a vise-like application.

Pneumatic Block Swing Clamps are durable for ideal use in high product applications. Loading and unloading is made easier by the clamp arm's ability to swing or lift out of the way. These clamps can be mounted horizontally or vertically.

Through Hole Mount Plunger Clamps are designed for quick action when working with wide size variations or where opening and closing motions need to be long. The locking handle is rotated to advance the plunger and lock it with the collet action.

Manual Horizontal Hook & Latch Clamps operate on a horizontal plane allowing two faces to be fastened together on the same plane or at 90 degrees. These clamps have a low profile for applications having a height restriction.

Pneumatic Block Hold Down Clamps provide clamping force from the top, wedging work pieces down against the work surface. Styles include automation power clamps, power rollers, and heavy duty clamps to best suit your application.

Manual Vertical Hold Down Clamps save valuable space without sacrificing holding capacity or clamp performance. A cushioned vinyl handle grip provides improved user comfort and all body and linkage components are zinc plated to resist corrosion.

Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability.

Manual Vertical Hook & Latch Hold Down Clamps operate on a horizontal plane allowing two faces to be fastened together on the same plane or at 90 degrees. These clamps have a low profile for applications having a height restriction.