GraLab Timers

The Model 171 60-Minute Timer provides precise timing for industrial and laboratory work with second- and minute-hand settings. With GraLab Timing Devices you get accuracy even at maximum setting, combined with features for ease of use. Two grounded outlets allow you to automatically switch external appliances with the Model 171 timer. Control one appliance with a switch which will turn it off or on when time elapses. The other outlet will always turn off when time elapses independent of the switch. Large numerals on a 6 1/2" face are easy to read. An outer ring tells you elapsed time, while the inner circle can be used as a stop clock. The buzzer alarms at the end of the timing cycle and can be heard above ambient noise levels. Rubber base pads, wall mounting keyholes and a recessed hand grip on the sturdy 7 1/2 in x 7 1/2 in x 2 1/2 in plastic case give you multiple placement choices. Features a permanent plastic boot over the power and outlet control switches to prevent contamination or corrosion. Limited one-year warranty.

The solid state digital timer is an excellent choice for factory, lab or studio use. It has two independent, programmable memories for single cycle switching or continuous cycling. It has a simple design with highly visible two-digit LED display that makes time setting easy. The 99 minute time range can be set in minutes,
seconds and 1⁄10 seconds. It has easily adjustable controls for display brightness, AC outlet power, audio signal choices and countdown time ranges. The three countdown time ranges are minutes up to 99, seconds up to 99 and tenths of seconds up to 9.9. The three audio signal choices are off, metronome and end-of-cycle tone. The timer has a durable plastic case with rubber base pads and wall mounting keyholes in the back.

The Model 565 Timer Footswitch efficiently controls all electronic timers. Compact and attractive in a durable, formed steel case, the 565 Footswitch features heavy tread on the treadle and a skid-proof base to make use even easier. Light pressure operates the 565, leaving you less fatigued. An 8' cord is included. All GraLab electronic timers have an output jack, which provides an output signal to control devices whose maximum rating is no more than 30 milliamperes at 30 volts DC. SPST – NO contacts rated 15 amps @ 120-240 VAC.

Contemporary, easy-to-read numerals on a large 6 1/2 inch diameter face. Numerals, dial and hands are luminous. The 60-minute time range can be set in minutes for developing and seconds for enlarger control. Two hands permit quick setting by seconds, minutes or combinations of seconds and minutes. An exclusive dual-cam mechanism provides extreme accuracy for long time intervals: +/-.015% at maximum dial setting. Two separate outlet receptacles control an enlarger or printer and safelight by a combination time/focus switch. Each outlet has a 600 watts rated capacity for operating most film processing equipment. The Model 300 can be used with a relay for heavier loads. The case is made of durable plastic and measures 7 1/2 in x 7 1/2 in x 2 1/2 in. It is exceptionally strong, withstands high impact, resists chemicals and moisture, and is electrically non-conductive. The case has a recessed handle in the back and keyholes for wall mounting. The buzzer alarms at the end of the timing cycle and can be heard above ambient noise levels.

The Model 172 15-Minute Timer provides precise timing for industrial and laboratory work with second- and minute-hand settings. With GraLab Timing Devices you get accuracy even at maximum setting, combined with features for ease of use. Two 3-wire receptacles allow you to automatically switch external appliances with the Model 172 timer. Control one appliance with a switch which can either make or break circuit at zero. The other receptacle is independent of the switch and always breaks the circuit at zero. Large numerals on a 6 1/2 inch face are easy to read. An outer ring tells you elapsed time, while the inner circle can be used as a stop clock. The buzzer alarms at the end of the timing cycle and can be heard above ambient noise levels. Rubber base pads, wall mounting keyholes and a recessed hand grip on the sturdy 7 1/2 in x 7 1/2 in x 2 1/2 in polycarbonate/PET case give you multiple placement choices. Features a permanent plastic boot over the power and outlet control switches to prevent contamination or corrosion. Limited one-year warranty.

GraLab has the dependable timers every chef, short-order cook or kitchen manager needs. For every menu. For every timing need - prepping, holding, chilling, baking, browning, sautÈing, frying, monitoring freshness, etc. The Model 254 Food Preparation Interval Timer gives you sustained accuracy from 1 minute to 60 minutes! The timer features a plastic boot over the power switch (which does not have to be removed for operation) to prevent build up of flour and grease. Never miss the end of a timed cooking cycle again. GraLab's buzzer alarm is loud enough to be heard over the din in the busiest kitchen. And, they are big - 7 1/2 in x 7 1/2 in x 2 1/2 in - so you can read them easily. Limited one-year warranty.

The Model 255 food service timer has the dependable timing every chef, short-order cook or kitchen manager needs. For every menu. For every timing need - prepping, holding, chilling, baking, browning, sautÈing, frying, monitoring freshness, etc. The Model 255 has a 15 minute timing range which you can set in minutes and seconds. It features a plastic boot over the power switch (which does not have to be removed for operation) to prevent build up of flour and grease. Never miss the end of a timed cooking cycle again. GraLab's buzzer alarm is loud enough to be heard over the din in the busiest kitchen. And, it's big - 7 1/2 in x 7 1/2 in x 2 1/2 in - so you can read them easily across any room or kitchen. A gray plastic case with rubber base pads and "keyholes" for effortless wall mounting houses the Model 255. Limited one-year warranty.

The Model 173 15-Hour Timer provides precise timing for industrial and laboratory work with minute- and hour-hand settings. With GraLab Timing Devices you get accuracy even at maximum setting, combined with features for ease of use. Two 3-wire receptacles allow you to automatically switch external appliances with the Model 173 timer. Control one appliance with a switch which can either make or break circuit at zero. The other receptacle is independent of the switch and always breaks the circuit at zero. Large numerals on a 6 1/2 inch face are easy to read. An outer ring tells you elapsed time, while the inner circle can be used as a stop clock. The buzzer alarms at the end of the timing cycle and can be heard above ambient noise levels. Rubber base pads, wall mounting keyholes and a recessed hand grip on the sturdy 7 1/2 in x 7 1/2 in x 2 1/2 in polycarbonate/PET case give you multiple placement choices. Features a permanent plastic boot over the power and outlet control switches to prevent contamination or corrosion. Limited one-year warranty.

In the gym, classroom or on the field, GraLab Sports Timers provide split-second synchronous accuracy for any period from 1 second to 60 minutes. They're ideal for team sports, one-on-one competition and exam timing plus dozens of other scholastic and sports timing uses. A built-in buzzer automatically signals the end of the period. A push button on top lets you control the built-in buzzer and a horn or light plugged into the accessory outlet to gain the attention of officials and participants during action or time-out. The 6 1/2 inch, easy-to-read white dial has large black numerals and an inner circle of red numerals that can be read at a glance from a court or playing field. The red numerals let you use the timer as a minutes-and seconds-elapsed time indicator or stopwatch. The case is made of durable plastic. It's strong, withstands high impact, resists moisture and is electrically non-conductive. A recessed hand grip in the back and rubber base pads provide multiple mounting options. Input voltage is 100 to 130 VAC, 50 or 60 Hz (U.S. And Canada). 3-Wire plug fits all standard grounded sockets.

The Model 170 60-Hour Timer provides precise timing for industrial and laboratory work with minute- and hour-hand settings. With GraLab Timing Devices you get accuracy even at maximum setting, combined with features for ease of use. Two 3-wire receptacles allow you to automatically switch external appliances with the Model 170 timer. Control one appliance with a switch which can either make or break circuit at zero. The other receptacle is independent of the switch and always breaks the circuit at zero. Large numerals on a 6 1/2" face are easy to read. An outer ring tells you elapsed time, while the inner circle can be used as a stop clock. The buzzer alarms at the end of the timing cycle and can be heard above ambient noise levels. Rubber base pads, wall mounting keyholes and a recessed hand grip on the sturdy 7 1/2" x 7 1/2" x 2 1/2" polycarbonate/PET case give you multiple placement choices. Features a permanent plastic boot over the power and outlet control switches to prevent contamination or corrosion. Limited one-year warranty.