Flanged Base Manual Push Pull Clamp - Holding Force (Seed): 100 lbs 3.280 in H x 4.710 in L
TC-603
About this product
Flanged Base Manual Push Pull Clamp fits 5/16-18 spindle threads to hold materials in place with 100 lbs of force. The low profile clamp uses a Forward Action to prevent slippage and movement.
In stock
| Mount Type | Flanged Base |
|---|---|
| Holding Force | 100 lbs |
| Plunger Travel | 1.250 in |
| Plunger Diameter | .440 in |
| Mounting Hole Pattern | 2 x 2 |
| Base Width | 1.310 in |
| Overall Length | 4.710 in |
| Overall Height | 3.280 in |
| Handle Movement Action | Forward Action |
| Handle Colour | Red |
| Mounting Hole Spacing Along Length | 1.440 in |
| Body Material | Steel |
| Mounting Hole Spacing Along Width | 1.310 in |
| Plunger Thread Type | Internal Thread |
| Compatible Thread Sizes | 5/16-18;M8 |
| Base Length | 2.000 in |
| Mounting Hole Spacing | 1.310 x 1.440 in |
| Mounting Hole Diameter | .270 in |
| Height to Plunger Center | .970 in |
| Compatible Spindle Thread Sizes | 5/16-18 |