C-Washers can be used to distribute the load of a fastener and help prevent damage to the object being fastened.Dished washers are similar to spherical washers, but instead are designed for elongated holes. They are punched, gauged and tempered.Ideal for applications where there is an uneven surface. Offered as pairs or individual male and female pieces.Ball Head Position Adjusters allow exact positioning when assembling sloping bases up to approximately four degrees angle of inclination. A second ball head position adjuster is recommended as a base in sloped positions. They are one-piece constructed.Bonded WashersMetal flat washers are available in mild or stainless steel. They provide full insulation, cushioning and spacing.Designed for applications involving low loads and require high deflection. Available in plain, metal, or zinc plated finishes.Commonly used as a take up spring for a wide range of load bearing applications. Provide greater load bearing capacity than single wave washers with some loss in deflection capability.Snubbing Washers are used with bonded mounts to provide multi-directional vibration isolation, shock attenuation, and noise reduction. When used together, these fail safe mounts and washers are easy to install and provide consistent performance."
For large volumes and customised products, add to your cart and click request a quote, orcontact usand we will respond within 2 working days.
Use the filters or search below to find what you're looking for
Price range | Availability | Bolt Size | Height | Special Offer | Type | Brand | View | ||||
---|---|---|---|---|---|---|---|---|---|---|---|
$0.27 - $0.27 | Click here for lead time. |
|
|
|
Split Washer Spring
|
RAF Electronic Hardware
|
|||||
$4.37 - $4.37 | Click here for lead time. |
|
0.236 in
6.0 mm
|
|
Dished Washers
|
AMF
|
|||||
$22.26 - $22.26 | 18 In stock |
|
.50 in
12.7 mm
|
|
Top and Bottom
|
Reid Select
|
|||||
$20.03 - $20.03 | Click here for lead time. |
|
.50 in
12.7 mm
|
|
Top and Bottom
|
Reid Select
|
|||||
$1.44 - $1.44 | 234 In stock |
|
0.181 in
4.6 mm
|
|
Top and Bottom
|
AMF
|
|||||
$0.61 - $0.61 | 61 In stock |
|
0.138 in
3.5 mm
|
|
Top and Bottom
|
AMF
|
|||||
$4.60 - $4.60 | 290 In stock |
|
.1875 in
4.8 mm
|
|
Top and Bottom
|
Reid Select
|
|||||
$18.23 - $18.23 | 32 In stock |
|
0.38 in
9.7 mm
|
|
Swing
|
Reid Select
|
|||||
$2.41 - $2.41 | 22 In stock |
|
.1875 in
4.8 mm
|
|
Top and Bottom
|
Reid Select
|
|||||
$7.93 - $7.93 | 19 In stock |
|
.3125 in
7.9 mm
|
|
Top and Bottom
|
Reid Select
|
|||||
$10.56 - $10.56 | 105 In stock |
|
.50 in
12.7 mm
|
|
Top and Bottom
|
Reid Select
|
|||||
$7.07 - $7.07 | 40 In stock |
|
.250 in
6.4 mm
|
|
Top and Bottom
|
Reid Select
|
|||||
$13.87 - $13.87 | Click here for lead time. |
|
.375 in
9.5 mm
|
|
Top and Bottom
|
Reid Select
|
|||||
$1.36 - $1.36 | 103 In stock |
|
0.157 in
4.0 mm
|
|
Top and Bottom
|
AMF
|
|||||
$5.93 - $5.93 | 17 In stock |
|
0.323 in
8.2 mm
|
|
Top and Bottom
|
AMF
|
|||||
$2.81 - $2.81 | 43 In stock |
|
0.244 in
6.2 mm
|
|
Top and Bottom
|
AMF
|
|||||
$2.18 - $2.18 | 240 In stock |
|
.098 in
2.5 mm
|
|
Top and Bottom
|
Reid Select
|
|||||
$3.16 - $3.16 | 452 In stock |
|
.125 in
3.2 mm
|
|
Top and Bottom
|
Reid Select
|
|||||
$5.02 - $5.02 | 294 In stock |
|
.1875 in
4.8 mm
|
|
Top and Bottom
|
Reid Select
|
|||||
$15.02 - $15.02 | 28 In stock |
|
0.394 in
10.0 mm
|
|
Top and Bottom
|
Kipp
|
|||||
Unfortunately your session was timed-out due to inactivity. Please log in or reload page to continue.